The CC-800B Crack Depth Indicator
The CC-800B is a portable specialized instrument based on the four pin potential drop principle for measuring depth of surface appearing flaws in all ferrous and most non-ferrous metals. Flaw depths are directly displayed without the need of conversion charts in inches or mm. Storage case, battery and battery charger included.
A Probe and metal calibration block are required.
Select the probes and calibration blocks from our selection that meet your application requirements.
- Depth range= .010 to 1.99 inches (.25to 51mm)
- Accuracy= Ferrous Range=10% Non-Ferrous Range=20%
- Metal Range= All metal except Gold, Silver and Copper
- Input Power= 100/230 VAC 30 VA
- Temperature Range= 32-120°F (0 to 55C)
- Weight= 6 lb. (2.7 kg)
- Size-H.xW.xD.= 5x9x9 inches (127x229x229mm)
MPI-B Probe -A general purpose fixed pin probe for low conductivity metals up to 20% I.A.C.S. For use on flat stock to 10" O.D. or I.D. surfaces. Best for rough surfaces and rough handling.
SP1-B Probe -A general purpose spring probe with replaceable pins for metal up to 50% I.A.C.S. For use on flat stock to 2"O.D. pipe. The SP1-B features a "V" block base and remote contact indicator. Best for use on flat stock or tubing.
MP4-B Probe -A general purpose spring probe with replaceable pins for metal up to 50% I.A.C.S. A small 5/8" probe head and 0.1" pin spacing allows use on tight 1/4" radius and confined area measurements.
MPL-4 Probe -A general purpose right angle spring probe with replaceable pins for metal up to 50% I.A.C.S. A 5/8" handle and a small 1/2" detachable head allows use 1-1/2" and confined area measurements.
Standards marked at .1, .2, .3, .4 and .5 inches (or 3, 6, 9, and 12 mm) + 3%. Normal stock metals are; C1018, E4130, E4140, S.S. 304, S.S. 410,AL.2024, AL. 7075 and Ti. 6AL-4V
For CC-800B equipment. Foam lined ABS case with cutouts for 4 each, Probes and Calibration Blocks.