Free newsletter:
NDT promos & resources.
 


 

 
 
There are 0 items currently in your shopping cart
1 - 2 of 2
Crack Depth Meter
T.S.I. : CC-800
Crack Depth Meter
 

The CC-800B Crack Depth Indicator

****DISCONTINUED*****

The CC-800B is a portable specialized instrument based on the four pin potential drop principle for measuring depth of surface appearing flaws in all ferrous and most non-ferrous metals. Flaw depths are directly displayed without the need of conversion charts in inches or mm. Storage case, battery and battery charger included.

A Probe and metal calibration block are required.
Select the probes and calibration blocks from our selection that meet your application requirements.

Specifications::

  • Depth range= .010 to 1.99 inches (.25to 51mm)
  • Accuracy= Ferrous Range=10% Non-Ferrous Range=20%
  • Metal Range= All metal except Gold, Silver and Copper
  • Input Power= 100/230 VAC 30 VA
  • Temperature Range= 32-120°F (0 to 55C)
  • Weight= 6 lb. (2.7 kg)
  • Size-H.xW.xD.= 5x9x9 inches (127x229x229mm)

Probes:

MPI-B Probe -A general purpose fixed pin probe for low conductivity metals up to 20% I.A.C.S. For use on flat stock to 10" O.D. or I.D. surfaces. Best for rough surfaces and rough handling.

SP1-B Probe -A general purpose spring probe with replaceable pins for metal up to 50% I.A.C.S. For use on flat stock to 2"O.D. pipe. The SP1-B features a "V" block base and remote contact indicator. Best for use on flat stock or tubing.

MP4-B Probe -A general purpose spring probe with replaceable pins for metal up to 50% I.A.C.S. A small 5/8" probe head and 0.1" pin spacing allows use on tight 1/4" radius and confined area measurements.

MPL-4 Probe -A general purpose right angle spring probe with replaceable pins for metal up to 50% I.A.C.S. A 5/8" handle and a small 1/2" detachable head allows use 1-1/2" and confined area measurements.

Calibration Block:

Standards marked at .1, .2, .3, .4 and .5 inches (or 3, 6, 9, and 12 mm) + 3%. Normal stock metals are; C1018,  E4130, E4140, S.S. 304, S.S. 410,AL.2024, AL. 7075 and Ti. 6AL-4V

Carrying Case:

For CC-800B equipment. Foam lined ABS case with cutouts for 4 each, Probes and Calibration Blocks.

 

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

CC-800B Crack Depth Indicator

CC-800B Crack Depth Indicator

EM-TSI-400110

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

MPI-B Fixed Pin Probe

MPI-B Fixed Pin Probe

EM-TSI-400130

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

SP1-B V-Block Probe

SP1-B V-Block Probe

EM-TSI-400120

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

MP4-B Pencil Probe

MP4-B Pencil Probe

EM-TSI-400122

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

MPl-4 90 I.D. Probe

MPl-4 90° I.D. Probe

EM-TSI-400123

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Calibration Block Alloy Steel

Calibration Block Alloy Steel

EM-TSI-400840

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Calibration Block Stainless Steel

Calibration Block Stainless Steel

EM-TSI-400850

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Standard Replacement Probe Pins

Standard Replacement Probe Pins (36 pins)

EM-TSI-400190

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Storage Case

Storage Case

EM-TSI-400860

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Crack Depth Meter
Karl Deutsch : RMG 4015 Crack Depth Gauge
Crack Depth Gauge
 

Crack depth measurements are used to determine if a part can be economically repaired or possibly to determine if a shaft or other component may remain in service while a replacement part obtained.

The Karl Deutsch RGM 4015 crack depth gauge measures crack depths on workpieces of iron, ferrous and austenitic steels and can also be used for cracks in copper, brass, aluminium and other non-ferrous metals.

The RGM 4015 uses the electrical potential principle: A probe with four spring-loaded, gold plated, contact pins is positioned across the crack to be measured on the workpiece. A constant alternating current is passed via two of the pins into the workpiece; the two other pins measure the voltage drop across the crack from which the depth of the crack is derived.  The alternating current creates a skin effect, which forces the current to follow the surface of the conductor and therefore follows the contour of the crack. The instrument compares the change in current on between a good area and compares it with current over a crack. The amount of change is proportional to the crack depth.

Price includes:

1- RGM 4015

1-  Carrying case

1- Interface cable

1- RMSQ 0 degree Probe

1- Calibration block, 0 to 10 mm crack depth

 

 

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

RMG-4015

Crack Depth Gauge Kit with; RGM 4015,Carrying case,Interface cable,RMSQ 0 degree Probe,Clibration block, 0 to 10 mm crack depth

ET-KD-RMG4015

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

1 - 2 of 2

top