Free newsletter:
NDT promos & resources.
 


 

 
 
There are 0 items currently in your shopping cart
1 - 1 of 1
Eddy Current & Electro-Μagnetic >> Simple Crack Detectors - Steel
NDT Supply : - CC-100 CrackChek
CrackChek
 

NDT Supply - CrackChek CC-100

Crack detection has never been easier or more affordable!

Detects and measures surface cracks in steel - Even under thick protective coatings!

Faster, easier, cleaner than magnetic particle or dye penetrant inspection

The CC-100 has similar sensitivity to Hocking Weldscan + it's easier to use and is less than 1/2 the size and 1/3 the price!

Inspect:

- Bridges, towers, buildings and other structures

- Amusement park rides

- Mining and earth moving equipment

- Cranes and other lifting equipment

- Ships, tanks, military hardware

- Pipelines, pressure vessels and oil field equipment

- Signal Light Masts, etc.

Without removing paint!

Features:

- Detects cracks under thick coatings

- Simple to use

- Indicates crack severity (depth)

- Accurately find the crack tip

- Minimal training required

- No need to remove paint and other coatings.

- No need to remove oil and grease

- Economical

- Fast – scan a foot of weld in 10 seconds!

- Minimize the use of dye penetrant and magnetic particle inspection

- (use only to prove-up test results).

- Less expensive and easier to learn to use than eddy current and ACFM instruments

- Light weight – 0.6 lb. (300gr.)

- No consumables

- No mess

- No cleanup

- 14 hour battery operation

- Water resistant case (IP-65) 

CC-100 Electro-Magnetic Crack Detector

The CC-100 CrackChek is designed to easily detect surface cracks caused by stress, fatigue and corrosion in steel and iron parts and structures.

The principle of operation is based on measuring of the magnetic flux leakage field in the zone of the cracks.

The CC-100 has a number of advantages over the conventional eddy-current instruments:

- Grinding and other surface preparation is generally not required

- Cracks detection through heavy coatings (80 mil/2 mm) is possible

- Inspection of rough and corrosion-damaged surfaces

- Crack detection of welds and and adjacent heat affected zone

- Significantly less expensive than most eddy current instruments

- Significantly easier to use than eddy current instruments

- Only a faction of the price and much easier than ACFM

- No "edge effects"

The CC-100 is compact and equipped with an internal rechargeable lithium-ion battery pack. The probe is stainless steel and is wear resistant and easily protected.

The CC-100 is easy to operate and adjust. The instrument adjustment is performed by placing the probe perpendicularly on the test surface and pressing the "Zero" button. Than scan the probe over a reference notch or crack and adjust the sensitivity as needed with the < or > adjustment buttons. Set-up is accomplished in under a minute.

During operation, when the sensor crosses the crack, the instrument generates an audible alarm. Crack severity (relative depth) is indicated on the instruments L.E.D. bar graph display.

Technical data:

Cracks indication range:

 
depth: > 0.008"/0.2mm
width: > 0.0004"/0.01mm
length: > .060"/1.5mm
Probe Angle: +/- 30 degrees
Angle to crack: +/- 30 degrees
Scanning speed: 20"/.=0.5m/sec,
Operation time per charge: 14 hours
Temperature Range: 23o-131oF/-5o-55Co
Light weight 0 .6 lb/0.3 kg
Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

CC-100

Crack Check Kit. Includes: probe, test block, shims, charger and carrying case.

EM-NDTS-CC100

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Pencil Probe - spare

Spare/replacement standard pencil probe

EM-NDTS-CC-100-PS

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

1 - 1 of 1

top