Free newsletter:
NDT promos & resources.
 


 

 
 
There are 0 items currently in your shopping cart
1 - 1 of 1
Magnetic Particle >> Wet Horizontal Testers >> Solid State Systems
Solid State Systems :  - S-5000 Series
S-5000 Multi-Mode Mag Machine
Please email us or call 1-800-635-9108 or 913-432-7080 for current pricing.
 

S-5000 series "3-D" Multi-Mode Magnetic Particle Inspection System for production and piece part testing

the S-5000 "3-D" is the most flexible and adaptable mag. unit available

  • "3-D" mode for one-shot detection of flaws in ALL directions
  • Standard mode for conventional testing using Head-Shot and Coil modes

All current types are provided for maximum flexibility - They can be used in ANY combination

  • FHWC - Full Wave DC

  • HWDC - Half Wave DC

  • AC - Alternating Current

FEATURES:

All functions are fully switchable by the operator from the front panel. Three individual current control knobs are provided for fine tuning and superior controllability

Demagnetization is accomplished by selecting either AC ramp-down or reversing DC.

The "3-D" system utilizes all solid state control and switching technology. Standard magnetization time for all three directions is less than 200 milliseconds, controlling a three-phase power train.

The "3-D" system meets the requirements of MIL-STD-1949A.

WHY IS IT IMPORTANT?

Solid State Systems "3-D" M.P.I. test system increases test reliability, improves defect detection and reduces labor cost dramatically. Multiple step magnetizations are routinely reduced from eight or ten steps down to one or two. Man hours can be decreased approximately by 80%.

The shot duration time starts at a phenomenal 0.18 seconds.

The "3-D" MPI system is presently being used and/or approved by:

  • United Technologies/Hamilton Standard
  • Boeing/McDonald Douglas Aircraft Co.
  • Allied-Signal Aerospace Co.
  • Naval Ordnance.
  • Eaton Corp.
  • GE Aerospace
  • Lucas Aerospace

ELECTRICAL:  

  • TANK:    V-Bottom 15 to 20 Gallon Capacity. (304 Stainless Steel).
  • CIRCULATION: Wide Clearance Type Impeller Pump.
  • FLUID APPLICATION: Hand Held Hose.
  • GRILLES: Hardwood. HEADSTOCK: Air Operated, Foot-switch Activated.
  • HOOD: (Optional) Flameproof Curtain Enclosure, Folding Type.
  • Modular Electronics, Solid State Logic Controls, and Secondary Switching.
  • INPUT VOLTAGE: 240/480, 50/60 cy. 3 phase.
  • LINE AMP DRAW : 300/150.
  • HERTZ: 50/60 (No switching required).
  • RECTIFICATION: Silicon Rectifiers.
  • CURRENT CONTROL: Infinitely Variable. (Three Turn Pots).
  • MAG. TIMER: .2 seconds (200 milliseconds). - DEMAG. TIMER; 3 Seconds AC or Rev. DC.
  • THERMAL PROTECTION: Auto Reset. METER READOUT: Digital-LED Display (Holding).
  • VOLTAGE CONVERSION: "Safeguard" One Step. Voltage: 240/480 Volts

Models Available:

  • Head Opening:  39 inches to 40 foot !
  • Power Supplies: 4,000 - 6,000 - 10,000 Amps 

1 - 1 of 1

top