Free newsletter:
NDT promos & resources.
 


 

 
 
There are 0 items currently in your shopping cart
1 - 3 of 32
Next
Eddy Current & Electro-Μagnetic >> Aircraft Wheel Inspection Systems
Centurion NDT : Centurion ED-510XL
Simple Eddy Current Flaw Detector
 

ED-510XL
Hand Held Flaw Detector

Special Features:

The ED-510XL is a hand-held eddy current instrument which accurately detects flaws in metal parts and can sort metals by alloy type. In addition to the versatility of being hand-held, the ED-510XL also features:

- Simplicity of operation, for quick scanning

- Solid state design, with integrated circuitry for reliable detection

- Variable frequency range of 140KHz to 200KHz

- Superior flaw detection in magnetic and non-magnetic materials

- Power is provided by a single 9-volt alkaline battery (battery life is 4 to 8 hours depending on use)

- Interchangeable probes including absolute probes from the ED-520 and ED-530, or special probes designed for your application

- A sensitivity standard with 0.008", 0.020", and 0.040" milled slots

 

 

 

 

Applications:

The ED-510XL is a hand-held, portable unit which offers high sensitivity, versatility and simplicity in operation. It will locate surface and near-surface flaws in non-magnetic materials as well as surface defects in magnetic materials where permeability is relatively constant throughout the test area. The ED-510XL will sort materials according to such properties as hardness, alloy type, carbon content, heat treat condition, tensile strength and grain structure based on changes in magnetic and electrical characteristics.
The ED-510XL is ideal in testing for defects in airframe and engine components, welding inspection, and various sorting applications. In addition, the ED-510XL can compare the relative coating thickness and relative conductivity to a known test standard.

Operation:

The ED-510XL instrument accurately measures the changes in chemical make-up of the test part when the eddy currents induced through the probe are affected by changes in the test part characteristics. When the probe passes over a variation in the metal, (a crack, thickness or density variation,) it creates an eddy current imbalance in the coil of the probe, and sends a signal to the front panel meter. The meter gives a visual interpretation of the flaw.

Description:

The instrument comes with a medium frequency, short pencil probe and an aluminum flaw sensitivity test block. The front panel of the instrument includes an easily read meter and the following controls and components:

- "Lift-off" control is a single-turn potentiometer providing a continuously variable frequency range of 140KHz to 200KHz to select the proper operating frequency for lift-off compensation.

- "Balance" control is a single-turn potentiometer. It adapts the probe used to the bridge circuit and is used to position the pointer on the meter.

- "Power" switch provides power to the instrument. Access to the battery is on the back of the instrument.

- "Sensitivity" control is a single-turn potentiometer used to set the sensitivity level of the instrument. Maximum sensitivity is obtained with this control set fully up.

Specifications:

Dimensions: Hand-held unit 3.5" wide x 7.1" long x 1.9" deep (Carrying Case 8" x 8" x 3.5")
Weight: Hand-held unit 0.8 lb (0.04kg) (w/Carrying Case 2.2 lbs (1kg))
Frequency Range: 140KHz to 200KHz
Power Requirements: One 9-volt alkaline battery (included)
Readout: Square meter, 2.5" wide; scale numbered from 0 to 500 in 50 divisions.

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

ED-510XL

ED-510XL Hand-held Eddy Current Instrument, includes: Aluminum 3 Slot Test Block(207066), General Purpose Mini Probe (222296S), Probe Cable, Microdot to BNC (210816), One 9 Volt Battery, Operators Manual

78-220025

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Eddy Current & Electro-Μagnetic >> Aircraft Wheel Inspection Systems
Centurion NDT : Centurion ED-520ME
Automated Eddy Current Tester
 

ED-520ME Flaw Detector

Special Features:

Proven, reliable microprocessor-based circuit design

- Highly sensitive resonance-type eddy current instrument

- Automatic, pushbutton selection of operating frequency and balance

- Wide selection of probes and coils - interchangeable with existing equipment

- Variable frequency range from 55 KHz to 220 KHz

- Built-in threshold circuit includes an indicating lamp and an audible alarm

- Extremely versatile, yet simplified operation

- Dust-proof, weather resistant rugged aluminum enclosure for operation under most environmental conditions

- Includes test block and pencil probe

Applications:

The model ED-520ME eddy current instrument is an electronic device that will locate surface and near-surface discontinuities in non-magnetic materials. It also finds surface defects in magnetic materials, where permeability is relatively constant throughout the test area. In addition, the ED-520ME will sort classes of materials according to such properties as hardness, alloy type, carbon content, heat treat condition, tensile strength, and grain structure (where these relate to changes in the magnetic and electrical characteristics of the test part).

With proper standards, electrical conductivity may be evaluated. This often relates to the tensile strength of many aluminum and magnesium alloys. The instrument can also be used to measure the thickness of thin, non-magnetic sheets, as well as conductive and nonconductive coatings (when used with suitable standards).

The ED-520ME is widely used in military and commercial aircraft testing as well as process control, receiving inspection, research, and maintenance. Its compactness, ease of operation, and consistent precision make the ED-520 valuable for testing in foundries, heat treat shops, and manufacturing plants - wherever accurate data must be obtained quickly to establish fatigue or product reliability. The ED-520 features battery operation for extended field use. It is easily recharged for the AC line, using the supplied AC charger.

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

ED-520

ED-520, Microprocessor Based Eddy Current Instrument, Includes: Aluminum 3 Slot Test Block (225459); General Purpose Probe (222296); Probe Cable, BNC to Microdot (210816); Power Supply/Charger, 115VAC (520104) or Power Supply/Charger, 220VAC (520127)

78-220520

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Eddy Current & Electro-Μagnetic >> Aircraft Wheel Inspection Systems
ETher NDE : Vantage Eddy Current Flaw Detector
Vantage
 

 

ETher Vantage Eddy Current Instrument
 ETher Vantage Eddy Current Tester
 ETher Vantage Eddy Current Tester
 ETher Vantage Eddy Current Tester
 ETher Vantage Eddy Current Tester

 

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

Vantage

ETher Vantage Eddy Current Flaw Detector basic kit

EC-ET-KIVAN001

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Next   
1 - 3 of 32

top