Free newsletter:
NDT promos & resources.
 


 

 
 
There are 0 items currently in your shopping cart
1 - 3 of 5
Next
Hardness Testers - Portable >> Brinell >> Pin Brinell
Ernst/Quality Solutions : Pin Brinell Tester
STE Portable Hardness Tester
 

Pin Brinell Tester - STE

The Pin Brinell tester is the first Brinell hardness tester at a low price. The unique impact hardness method uses a shear pin to control the force applied by a hammer so it significantly reduces the costs of getting started in Brinell testing. The indentation left after a test is measured with a Brinell scope just like a standard Brinell, so the tester can be used on non-homogeneous metals and as-ground test surfaces. The kit comes with with everything needed for testing (except the hammer and carbide indenter if testing on high hardness materials) and includes a bag of 250 shear pins (one pin is required for each test).

  • Low-price Brinell testing

  • Each shear pin is precisely tested twice for accurate load application.

  • Load accuracy is +/-1% of load -- more accurate than competing models.

  • Tester can be verified on standard Brinell blocks from HB100 to 700 (higher ranges using optional carbide indenter).

  • Uses the same indenter diameter to load ratio as is used in regular 3000kg Brinell hardness testing

  • Very portable for use almost anywhere

  • Comes with an 8x power Brinell scope. Higher resolution scopes available at additional cost.

 

Pin Brinell testers have been used for decades in the USA and worldwide by thousands of companies. They were originally developed by the Ernst company to make testing much lower cost than the only alternative at the time, the impact bar method. Today there are knockoffs of the Pin Brinell due to its popularity, but the trade-off is quality - a tough choice to make when the product is meant to check the quality of your products.

Operation: The operator inserts an impact pin (above right) into the impact head (seen above left) and presses the indenter against the pin, puts the impact head into the impact sleeve and puts it into the holder (above, far right). The unit is placed on the test location and hit firmly with the hammer. The indentation in the sample is measured with the Brinell scope and a Brinell hardness result is read off the enclosed chart for the measured diameter. Prior to performing a second test the operator must remove the broken shear pin and push the indenter out of the shear pin hole, ready for the the next shear pin.

 MODEL STE-B SPECIFICATIONS

 Standard Accessories/Components

 

  • [1] Steel indenter for HB30 100-450 hardness range
  • [1] bag of 250 shear pins
  • [1] CP1 Brinell impact head
  • [1] CP2 impact sleeve
  • [1] Handle
  • [1] 8x Brinell scope
  • [1] pin extractor
  • [1] instructions/conversion chart
  • [1] Polished wooden handle
  • [1] 8x power Brinell scope
  • [1] pin  storage box
  • Shipping weight 2kg/4 lbs

 

Optional Items

  • Bag 250 Shear Pins
  • CP3 Steel Indenter
  • CP3A Carbide Indenter for testing higher range hardness
  • 8x Brinell scope
  • 20x Brinell scope
  • 3 pound baby sledge hammer

 

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

STE-B

 STE-B, Portable Hardness Tester, Dynamic Includes: Steel Indenter for HB30 100-450 Hardness Range, Bag of 250 Shear Pins, CP1 Brinell impact head, CP2 impact sleeve, Handle, 8x Brinell scope, pin extractor, instructions/conversion chart, Polished wooden handle, 8x power Brinell scope, pin storage box Shipping weight 2kg/4 lbs

HT-QS-STE-KIT

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

PIN-250

 Package of 250 Calibrated Pin Class F

HT-QS-PIN-250

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

PIN-250-C

 Package of 250 Calibrated Pin Class F with Certificate

HT-QS-PIN-250-C

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

H-3LB

 3 Lbs Hammer

HT-QS-H-3LB

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

C-02

 Cylinder Support Handle for STE-B EN

HT-QS-C-02

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

G-188

 Pin Removal Tool

HT-QS-G-188

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

G-201

 8X Eyepiece

HT-QS-G-201

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

P-001

 Regular Penetrator

HT-QS-P-001

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

P-002

 Hard Metal Penetrator (Carbide) 400-700 HB (65HRC)

HT-QS-P-002

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

G-178

 Penetrator Holder Assembly

HT-QS-G-178

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

B-003

 Cylinder for Impact Testing

HT-QS-STE-B-003

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

A-03

 Wooden Case for STE-B

HT-QS-A-03

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Hardness Testers - Portable >> Brinell >> Pin Brinell
Teleweld : Telebrineller
Portable Brinell Hardness Tester
 

 

THE TELEBRINELLER IS THE PROVEN PORTABLE BRINELL TESTER

Telebrineller hardness measurements are a direct comparison to a known physical reference and therefore measurements are not subject to inaccuracies due to; alloy, thickness, geometry, position, etc., that are common with many other portable testers.

The Telebrineller is rugged! Go ahead and smack it with a hammer!

Test anywhere - Field - Plant or Lab

It is also the least expensive Brinell tester and it will last forever


  • LIGHTWEIGHT The complete Telebrineller system, in its case, weighs less than ten pounds. Easily transported to any location, it is highly practical for all BrineIl hardness testing needs.
  • SIMPLE OPERATION One hammer blow, measurement of the resulting impressions, and the manipulation of a basic equation on the computer provided-that's all. No special training required. In a few minutes, anyone can learn to determine BHN accurately.
  • CERTIFIED ACCURACY The test bars which are the core of this system are calibrated to a uniform hardness of ± 3% of the labeled BHN. Hardness of the bars is measured by equipment whose accuracy is certified traceable to the National Standards Institute. The Telebrineller microscope is by Leica. Readings may be made within .05 millimeters.
  • ANYWHERE - WEATHERPROOF Designed for field use; there are no delicate adjustments or fragile components to be concerned with. All parts are rugged, solid, able to deliver accurate measurements in all weather, under the roughest field conditions.
Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

TeleBrineller Kit

Telebrineller Kit, complete with 5 bars of selected hardness, microscope, computer, bar holder, calculation pad, carrying case.

55-BHNTS

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Telebrineller Kit with Halteman Fillet Tester

Telebrineller Kit with Halteman Fillet Tester instead of standard bar holder

55-BHNTS-HF

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Hardness Testers - Portable >> Brinell >> Pin Brinell
Teleweld : Microscope
For use with Telebrineller and Halteman Testers
 

Teleweld portable Brinell microscope, accurate to +/- 0.05 mm

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

W-9000

Microscope for Telebrineller

55-239-21

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

W-9100

Calibration Disc

55-239-31

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Next   
1 - 3 of 5

top