Free newsletter:
NDT promos & resources.
 


 

 
 
There are 0 items currently in your shopping cart
1 - 3 of 7
Next
Systems - NDT Inspection >> Corrosion Mapping Systems
NDT : Guide to Nodularity Testing
Velocity Measuring Products
 

Ultrasonic testing has been used for many years to sort ductile (nodular) iron castings for proper nodularity based on sound velocity measurements.

There are currently a number of products that we can provide based on your application and budget requirements. 

Please review the below short descriptions and call us to discuss your application details and pricing. 

Dakota VX

Procedure:

  • Manually enter material thickness
  • Couple probe to material
  • Read velocity value
If material is consistent thickness - measurements in 1 second
If material is variable thickness - measurements in 1 minute
 
 
 

Karl Deutsh Nodularity Meter 1075

Procedure:

  • Measure with vernier caliper
  • Measure with probe
  • Velocity displayed with Hi/Lo
    Alarm
Measurements in 5-10 seconds
  • Data Processing Available
     

Sonotest-Atlantic Autoscan 2500L

 

Procedure:

  • Enter material thickness
  • Measure with probe
  • Velocity displayed with Hi/Lo
    Alarm
Features:
  • Dry Coupling
  • Suitable for manual or in-line spot testing of components of known thickness.
  • Direct reading of acoustic velocity
  • Alarm and value analog outputs allow integration into a variety of inline systems for automatic control in different modes.
Measurement time 1-2 seconds
 
 

Sonotron Isonic 2005 Nodularity

Features:

  • Measure with probe tipped vernier caliper
  • Pulse Echo or Thru-Transmission Modes available 
  • Signal quality displayed with
    velocity and go/no go alarm
  • Data processing capabilities
    available
Measurements in 1-2 seconds

American NDT Nodularity System

Procedure:

  • Insert part in the in-tank guide
  • Part thickness and nodularity are measured untrasonically
  • Machine evaluates velocity and if acceptable a Green Light and the part is stamped.
  •  If Bad a Red Light and the part is not stamped.

Manual Load/Unload 

Typical production rate is 600 parts per hour.

 
  American NDT Kicker Nodularity System

 

Procedure:

  • Insert part in the in-tank guide
  • Part thickness and nodularity are measured untrasonically
  • Machine evaluates velocity and if acceptable a Green Light and the part is stamped.
  • If Bad a Red Light and the part is not stamped.
  • Manual Load
  • Automatic Unload into Good/Bad baskets.
Typical production rate is 900-1200 parts per hour.

 

 

Systems - NDT Inspection >> Corrosion Mapping Systems
Sonotron : ISONIC
Isonic - Portable Ultrasonic Imaging System
 
ISONIC 2001
Smallest Size and Lightest Weight Ultrasonic Testing and Imaging Unit in the World

- A-,B-,C-,D-Scan and TOFD

- Mechanics-Free

- Weld Inspection

- Corrosion Mapping

- Inspection of Composites

- Mapping of Coatings

- Guided Waves Long Range Inspection and Imaging of Large Inaccessible Areas

- 3-D Data Presentation

- Comprehensive Postprocessing and Inspection Report

- Battery Operation

For more information, please see: ISONIC

Please Note: Check an item and click on the text "Add To Cart" in order to select an item.  Simply checking a box will NOT add the item to your shopping cart.
Model Description Part No. Price Add To Cart

Isonic

Isonic 2001

UT-RT-Isonic

Please email us or
call 1-800-635-9108 or 913-432-7080
for current pricing.

Systems - NDT Inspection >> Corrosion Mapping Systems
ScanTech : ScanTech Analyst DS2
Dryer Roller Scanning System
Please email us or call 1-800-635-9108 or 913-432-7080 for current pricing.

 

 

The Analyst D2S is a dryer roll scanning system designed to fill the unique requirements of ultrasonic inspection on cast iron paper machine dryer rolls. 

The D2S also provides the flexibility and reporting capabilities of the AnalystTM software. Velocity and time of flight (thickness) information, insuring proper calibration at any point on the roll.

The D2S Provides the Following Functionality:

- Automated calibration

- Reduced zero error (due to wedge construction and wear)

- Multiplexed, interleaved scanning for thickness and velocity

- Fast inspection rates

- Easily viewable A-scan display

- Automated data acquisition

- Graphical display

- Automated reporting

- Access to TOF data

- Reliable trending

- Flexibility in velocity application

- View velocity data

- Reduce noise in data

The D2S system is built upon the AnalystTM software and data acquisition system. This means that the features of this system are available for B-scan inspection of anything from piping to vessels and storage tanks. Automated reporting is available for the presentation of data in several scanplan type categories. If the C1 scanner is purchased, the system will also offer the best tank wall and roof corrosion inspection system available.

Next   
1 - 3 of 7

top